Other External Bulbs - Aston Martin DB 9 2010 Manual

Table of Contents

Advertisement

Dipped Beam Bulb
Warning: High Intensity Discharge (HID) bulbs produce a
very high voltage. They should only be serviced by an Aston
Martin Dealership.
High Intensity Discharge (HID) bulbs are used for dipped beam.
HID systems produce a brilliant white light by establishing a high-
voltage electrical arc between two electrodes within a sealed glass
tube. Once the arc is established, the voltage lowers to normal
operating conditions.
HID bulbs are not renewable. Refer to your Aston Martin Dealer if
a HID bulb fails to operate.

Other External Bulbs

Front Indicator, Parking and Side Marker Lamps
If a front indicator, parking lamp or a side marker lamp bulb fails to
operate, contact your Aston Martin Dealer.
Licence Plate Lamps
Bulb Specification
Rating - 5W
Type - WC5W (Festoon)
1. Lever the lamp unit from the licence plate side pod.
2. Remove the defective bulb from its holder and replace with a
new one.
3. Push and clip the
lamp unit back into
in position.
Rear Lamps
The rear indicators, stop and tail, reversing lamps and rear Fog LEDs
are contained in a sealed lamp cluster unit, one either side of the
vehicle. The lamp cluster is not repairable, if a rear lamp fails contact
your Aston Martin Dealer.
The high level mounted stop lamp unit consists of LEDs and is not
repairable. If a rear lamp fails contact your Aston Martin Dealer.
LEDs can last tens of thousands of hours and are resistant to heat,
cold, shock and vibration.
11.39

Advertisement

Table of Contents
loading

Table of Contents