HPE ProLiant DL160 Gen10 User Manual page 70
Hide thumbs
Also See for ProLiant DL160 Gen10:
- Maintenance and service manual (146 pages) ,
- Product end-of-life disassembly instructions (13 pages) ,
- Disassembly instructions manual (13 pages)
Table of Contents
Advertisement
5.
Disconnect all peripheral cables from the server.
6.
Do one of the following:
Extend the server from the rack.
•
•
Remove the server from the rack.
7.
Remove the access panel.
8.
Remove the primary PCI riser cage.
9.
Select the appropriate PCIe slot and remove the expansion slot blank.
10. If installing the option into slot 2 or slot 3, do the following:
a. Remove the full-height bracket from the M.2 SSD enablement board.
b. Install the half-height bracket onto the expansion board.
70
Hardware options installation
Advertisement
Table of Contents
