Installing A Smart Array Pcie Plug-In Controller - HPE ProLiant DL160 Gen10 User Manual

9. Remove the access panel.
10. Install the Smart Array modular controller.
11. Connect the cables to the backplane:
• 4 LFF
• 8 SFF
12. Install the access panel.
13. If removed, install the secondary PCI riser cage.
14. Install the server into the rack.
15. Connect all peripheral cables to the server.
16. Connect each power cord to the server.
17. Connect each power cord to the power source.
18. Power up the server.
19. If removed, install the bezel.
20. Configure the storage controller.
The installation is complete.

Installing a Smart Array PCIe plug-in controller

The Smart Array PCIe plug-in controller is only supported in PCIe slot 2.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• Smart Array PCIe plug-in controller option kit
This kit includes:
74 Hardware options installation