HPE ProLiant DL160 Gen10 User Manual page 64
Hide thumbs
Also See for ProLiant DL160 Gen10:
- Maintenance and service manual (146 pages) ,
- Product end-of-life disassembly instructions (13 pages) ,
- Disassembly instructions manual (13 pages)
Table of Contents
Advertisement
5.
Do one of the following:
Extend the server from the rack..
•
Remove the server from the rack.
•
6.
Remove the access panel.
7.
Remove the primary PCI riser cage.
8.
Remove the Media Module adapter blank.
9.
Install the Media Module adapter.
NOTE: Depending on the type of Media Module adapter purchased, the Media Module adapter may look slightly
different than shown.
10. Firmly seat the Media Module adapter in the connector and ensure it is secured with the latch.
64
Hardware options installation
Advertisement
Table of Contents
