System Battery Replacement; System Battery Information; Removing And Replacing The System Battery - HPE ProLiant DL160 Gen10 User Manual

System battery replacement

System battery information

The server contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery that provides
power to the real-time clock. If this battery is not properly handled, a risk of the fire and burns exists. To reduce the risk of
personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose the battery in fire or water.
• If the server no longer automatically displays the correct date and time, then replace the battery that provides power
to the real-time clock. Under normal use, battery life is 5 to 10 years.

Removing and replacing the system battery

Procedure
1.
Back up all server data.
2. If installed, remove the front bezel.
3. Power down the server.
4. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
5.
Disconnect all peripheral cables from the server.
6.
Do one of the following:
Extend the server from the rack.
•
Remove the server from the rack.
•
7. Remove the access panel.
8. Locate the battery.
9. Remove the battery.
122 System battery replacement