LINET Multicare X Instructions For Use And Technical Description page 55

Status (Pop-up window)
Horizontal position reached.
Confirm overwriting?
Maximum backrest angle reached.
MATTRESS INFLATION
Do not use mattress
until fully inflated.
Do not use untill calibration finished.
D9U001MCX-0101_03
Meaning
Bed reached horizontal position.
Confirmation window of a time change or
of an overwriting the scales history.
Maximum Backrest Angle was reached
on the bed equipped with Hercules.
Notification of the running inflation
process of the OptiCare X mattress after
switching from CPR Mode to OPTIMIZE
Mode.
Notification of the running automatic pro-
cess that should not be disturbed.
How to change the status
Position bed if needed.
Press TICK for confirmation or
CROSS for cancel.
Change the Backrest Angle ad-
justment if needed.
Wait until the mattress is inflated.
Wait until the Automatic Calibrati-
on is finished.
55