Table of Contents
Advertisement
8.1 Accumulator Activation
Control Section Placement
Fig. Isolating Foil Placement
Removing the Isolating Foil
To remove isolating foil:
►
Remove isolating foil from mains control box by pulling strap.
►
Check if isolating foil is complete and undamaged as shown in figure Detail of Isolating Foil.
►
If isolating foil is damaged, contact the manufacturer's service department immediately.
NOTE
Isolating Foil is sharp-edged. Remove it carefully not to cut yourself.
Fig. Detail of Isolating Foil
D9U001MCX-0101_03
31
Advertisement
Table of Contents
Need help?
Do you have a question about the Multicare X and is the answer not in the manual?