Ventilation Circuit Holder - LINET Multicare X Instructions For Use And Technical Description

19.12 Ventilation Circuit Holder

CAUTION!
Both Ventilation Circuit Holders are not compatible with Hercules Patient Repositioner!
The ventilation circuit holder prevents extubation of the patient connected to the ventilator.
► Always use LINET ® ventilation circuit holders to prevent extubation during any procedures.
Applying ventilation circuit holder:
► Raise the Backrest so that the Backrest frame is accessible.
► Put ventilation circuit holder in hole on right or left side of the Backrest frame.
► Fasten ventilation circuit holder with wing screw provided.
► Put intubation tube through plastic head of ventilation circuit holder.
► Tilt mattress support platform left and right by 15° to check if intubation tube is fastened securely. The fastening is secure if
no parts of the ventilation circuit are disconnected.
1
Fig. Ventilation Circuit Holders placed on the Backrest
1. Ventilation Circuit Holder 4MAS25012600
2. Ventilation Circuit Holder 4MAS600877600
152
2
D9U001MCX-0101_03