Omron V530-R150E-2 Operation Manual page 83

Menu Operations
Screen Displays
Scene No.
The current scene number is given.
10 different reading conditions can be set.
Scn 0 MON
Cursor
Move the Up, Down, Left and Right Keys to the desired setting.
Mode (*1)
Mode (*1)
The current mode is displayed.
––– ––– ms
Freeze (0)
Mode
SET (Set) Used to set reading conditions.
MON (Monitor) Used to confirm the reading can be properly
performed under the set conditions. Judgments
are displayed on the monitor and are not output
to external devices.
RUN (Run) Used to read codes. The judgment is output to
external devices or RS-232C via the terminal
blocks.
SYS (System) Used to set system conditions such as
communications specifications.
SAVE (Save) Used to save setting data to flash memory. Be
sure to save and turn OFF power to the
V530-R150 after changing the settings.
Section
Displayed Image
The type of image currently
displayed on the screen is
indicated. Set to through
image to check whether the
image is being displayed
properly. p. 152
Freeze (0)
SHIFT +
Through
Description
5-1
SHIFT +
71