Timing Chart
3-3-3
Reading Level Trigger (when trigger mode is
"Level Trigger")
OK judgment (Readable)
Enter RUN mode
RUN
TRIG B
BUSY
OK/NG
DO 0 to 3
GATE
(RS-232C)
Note The output time to RS-232C changes according to the data vol-
ume and baud rate.
Output Terminals
The same as continuous mode.
Input Terminals
Terminal
TRIG B
Continuous reading is performed while TRIG B signal is turned ON until
OK (readable) reading judgment is output.
*Delay of 33.3 ms max. occurs before starting to
load images after TRIG B signal is turned ON.
Reading
(OK)
Judgment (OK)
Coincidence judgment
Gate ON
Gate ON
delay
time
Output period
Function
Section
3-3
Leave RUN mode
31