Table of Contents
Advertisement
SET (Setting) Mode
6-1-9
Function Settings
1. Read QR (Normal)
1. Read QR (Pattern)
There are functions that can be used to increase the reliability of
reading. There are some restrictions as to what functions can be
used together, so use the function that is more important.
Note
Cell Verify can be used together with Judge Coincidence, Data History,
Reading Accuracy and Judge Gray Value, but no other combination can
be used together.
Function Settings
Function Settings
A
Cell Verify
B
Judge Coincidence
C
Data History
D
Reading Accuracy
1
Cell Verify is a function that performs verification judgment
by registering black and white information of cells as stan-
dard data.
When reading the same code continuously, surface defects
can be checked for.
Set to Register to register black and white recognition of
each cell and then set to ON .
Register: Black and white recognition of each cell being
read in the next trigger is registered as standard.
Verify:
Every time reading is performed, the registered
cell recognition is verified. If not verified, the sec-
tion will be displayed on the screen.
OFF:
No judgment is performed. (Default setting)
Note When this function is used, the setting of Display
Settings/Cell Position is invalid.
1. Read DM (Normal)
1. Read DM (Pattern)
Section
6-1
Function Settings
Function Settings
j
:
OFF
j
:
OFF
j
:
OFF
j
:
OFF
139
Advertisement
Table of Contents
Troubleshooting
