Table of Contents
Advertisement
SET (Setting) Mode
6-1-8
Display Settings
1. Read QR (Normal)
1. Read QR (Pattern)
Set the contents displayed in MON (monitor) mode and RUN
mode. The processing time will increase in proportion to the
number of display items selected.
Display Settings
Display Settings
A
Reading Data
B
Detail Data
C
Finder Pattern
D
Cell Position
E
Font Size
1
Select whether or not to display reading data on the screen.
(The default setting is ON.)
2
Select whether or not to display detailed data on the screen.
(The default setting is OFF.)
If turned ON, information such as detailed information about
codes and pixels per cell, etc. is displayed.
3
Select whether or not to display finder pattern positions on
the screen. (The default setting is ON.)
4
Select whether or not to display cell recognition positions on
the screen. (The default setting is ON.)
Note When Function Settings/Cell Verify is set to ON,
this function is invalid.
5
Select the font size of reading data to be displayed on the
screen. (x1/x4; Default setting is x1.)
When the displayed data exceeds the number of letters giv-
en below, the font size is automatically set to x1.
64 or more letters
(x4 when reading accuracy or data history function is ON.)
Data other than reading data (detailed data etc.) is dis-
played with x1 font size regardless of this setting.
1. Read DM (Normal)
1. Read DM (Pattern)
Section
6-1
Display Settings
Display Settings
j
:
ON
j
:
OFF
:
ON
j
:
ON
j
:
1
137
Advertisement
Table of Contents
Troubleshooting
