Omron V530-R150E-2 Operation Manual page 184

System
6-4-4 Startup Mode
Sets the scene number and mode to be displayed when the pow-
er is turned ON.
If the V530-R150 is set to start in RUN mode for the scene where
the desired reading conditions are registered, reading can be
started by simply turning the power ON.
Procedure
172
A
B
1
Select the startup scene number. (0 to 9; Default setting: 0)
2
Select the startup mode. (SET, MON, or RUN; Default set-
ting: MON)
1
Select Startup mode .
System settings
Communications
Backup
Image storage
Startup mode
Multi drop
Error method
Version
Section
j
j
MON
6-4