Omron V530-R150E-2 Operation Manual page 180

System
Operation Examples for Personal Computers
This section describes data transfer using the Hyper Terminal
provided on Windows95/98 and Windows NT4.0 computers. In
this example, a RS-232C cable is connected to the COM1 port of
the computer. Alter the example to suit your communications
software or COM port number.
Data transfer is performed with XMODEM (-CRC or -SUM) pro-
tocol method.
Note Never input the reset signal or turn OFF the power when proces-
sing messages for saving or loading operations are displayed.
Data may be lost, and the V530-R150 may not operate properly
the next time it is started.
168
4
Select the number for scene data and image data.
Scene No. (0 to 9)
Image Data (Memory 0 to 23, Image 0 to 1)
5
Select Execute when the confirmation message is dis-
played.
(e.g.) When saving system data:
Section 6-4