Omron V530-R150E-2 Operation Manual page 111

SET (Setting) Mode
0. Image Adjust
0. Image Adjust (DM)
Select the way the image taken by the Camera is to be pro-
cessed before it is displayed.
Note It is recommended that Weak Smoothing is selected as the fil-
tering method. When reading Data Matrix codes in Normal
mode, turn ON the Filtering Retry setting to read codes made
up of dots more effectively.
3
Select an appropriate speed whilst viewing the image.
Press the ENT Key to validate the setting.
Filtering
Filtering
Filtering selection
OFF
Smoothing
Enhance Edges
Moving rate
Slow
Fast
No filtering is performed.
The effects of noise are
suppressed to produce a smooth
image. The strength of the
smoothing can be selected
(strong or weak).
Borders between light and dark
areas are enhanced.
Section 6-1
Function
99