Omron V740 Series Operation Manual

Rfid reader/writer antenna
Hide thumbs Also See for V740 Series:

Advertisement

Quick Links

V740-series
RFID Reader/Writer Antenna
V740-BA50C02-
2 Ports - Reader/Writer
US
V740-BA50C22-
4 Ports - Reader/Writer
US
V740-HS02C
Dual Patch Antenna
The OMRON V740 RFID Reader/Writer (herein
after denoted as Reader) uses RFID (radio
frequency identification) technology to read data
stored on RFID tags. The Reader operates
analogous to an SQL (structured query language)
server, providing tag data in response to requests
from another application. A separate software
application may be used to direct its operation and
provide a user interface.
The Reader supports UHF (ultra high frequency)
antennas, which are available separately. The
Reader supports multiple configurations of UHF
antenna ports and transfers data to a remote
computer over a network connection.

V740 RFID READER

OPERATION MANUAL
Operation Manual
NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Contents
V740 RFID Reader ................................. 1
About this Guide..............................................2
Before You Begin ............................................2
Installation Requirements .........................2
Performance Considerations ....................2
Antennas .........................................................4
Antenna Cables ........................................4
Setting the Reader RF Power...................4
Reader Installation ..........................................5
Install the Reader......................................5
Install the Antennas ..................................5
Connect the Reader..................................5
Antenna Connection Options....................6
Reader Configuration ......................................6
Reader Service................................................7
Restarting the Reader.............................12
Using Safe Mode ....................................12
Specifications ................................................13
Transport Protocol.........................................14
Event/Query Protocol ....................................14
Syntax .....................................................15
supported by the V740............................15
Detailed Command Structure .................17
Errors ......................................................21
Parameter Settings .................................23
915 MHz EPC Class 1 ............................23
915 MHz EPC Class 0 ............................24
Examples.......................................................26
Example 1 ...............................................26
Example 2 ...............................................26
Example 3 ...............................................26
Declarations ......................................... 27
1 of 27
REV. 1.1
© OMRON CORPORATION 2004

Advertisement

Table of Contents
loading

Summary of Contents for Omron V740 Series

  • Page 1: Table Of Contents

    Restarting the Reader......12 V740-HS02C Dual Patch Antenna Using Safe Mode ........12 Specifications ..........13 The OMRON V740 RFID Reader/Writer (herein V740 RFID Reader Query Protocol ..14 after denoted as Reader) uses RFID (radio Transport Protocol.........14 frequency identification) technology to read data TCP Connection Setup and Teardown...14...
  • Page 2: About This Guide

    Note: Because customer requirements dictate the There are several variables associated with tags placement of Reader and antenna components, that can affect Reader performance: your OMRON representative will supply this information separately. • Application surface — Some materials interfere with tag performance including metal and moisture.
  • Page 3 – Antenna power can be reduced by reconfiguring the RF Transmit Power setting for the Reader. V740 RFID READER NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 3 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 4: Antennas

    6 dBi, and the cable has a minimum loss of 1.4 dB, the maximum RF power that may be set is (36- OMRON Dual Patch Antenna 6 + 1.4) = 31.4 dBm. Model: V740-HS02C The Reader RF Power is set through the Settings Gain: 6 dBi max.
  • Page 5: Reader Installation

    21 cm (8.3in). V740 RFID READER NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 5 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 6: Antenna Connection Options

    Apple’s website) to browse to it. The V740 Reader/Writer browser-based interface to the tag Reader is displayed. V740 RFID READER NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 6 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 7: Reader Service

    The V740 Reader browser-based interface communicates directly with the RFID Reader. It includes several tools that enable you to monitor V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 7 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 8 Query page. is displayed in large red numbers directly over the tags read list. V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 8 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 9 To read data from a tag: 1. Display the Write page (click the Write link on the navigation menu). V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 9 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 10 Instructions for Modifying the Settings Changing these parameters changes the Readers settings used on startup. Both radio settings and V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 10 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 11 3. Click OK. The following message appears and remains on the screen until the Reader restarts. Then the Status page appears. V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 11 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 12: Restarting The Reader

    Firmware Version: ....factory installed version UHF (915 MHz) RF Transmit Power:....32.5 IP Address: .............DHCP Hostname: ............V740 V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 12 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 13: Specifications

    Weight ..........1.4kg (3 lbs) Supported Tag Protocols 915 MHz ..........EPC Class 1 EPC Class 0 ISO 18000-6B V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 13 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 14: V740 Rfid Reader Query Protocol

    V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 14 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 15: Client Software Requests/Functionality

    Kill, Password: Disable tag, control access to disable function Data Read/Write/Lock: Access tag data (See Table RQL-1 below) V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 15 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 16 In the current state of the art, most protocols do not support addressed ID writes (ID V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 16 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 17: Detailed Command Structure

    The Reader returns the tag if the tag is present WHERE boolean_expr followed by an empty event (‘\n’) or an empty V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 17 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 18 A maximum of 16 cursors can be defined. UPDATE table SET col=expression [, To create a cursor: …] [WHERE wherelist]; V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 18 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 19 FROM tag_id SET SELECT id FROM tag_id SET time_out=250; time_out=1000; SET auto c = ON, repeat = 500; V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 19 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 20 112ms) should read all 20 EPC0 and 20 EPC1. FROM tag_id WHERE antenna_id = 1 OR antenna_id = 2 OR antenna_id = 4' V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 20 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 21: Errors

    DECLARE c2 CURSOR FOR SELECT id FROM tag_id WHERE antenna_id=2 AND protocol_id='ISO15693'; To run c1 once on February 14th 2004 at 18:54:50 GMT: V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 21 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 22 ERROR_UNKNOWN Error getting ip address entry (-128) ERROR_UNKNOWN Error getting netmask entry (-128) ERROR_UNKNOWN Error getting gateway entry V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 22 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 23: Protocol Specific Functionality And Parameter Settings

    UPDATE tag_id SET New_password: success_notification password=0x12 WHERE Password 8 bit (hex) protocol_id=’CC915’ AND antenna_id=1 Read Data Write Lock V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 23 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 24: 915 Mhz Epc Class 0

    UPDATE tag_id SET password=0x12 New_password: Password success_notifi WHERE protocol_id=’EPC0’ AND 8 bit (hex) cation antenna_id=1 Read Data Write Lock V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 24 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 25 64 bit success_notifi WHERE id=0x1234567890ABCDEF AND (hex) Lock cation blocknum=12 AND addr: integer protocol_id=’ISO18000-6B’ AND [8…223] antenna_id=1 V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 25 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 26: Examples

    DECLARE cursor_two CURSOR FOR SELECT id FROM tag_id SET time_out=350; SET repeat = 1000, SET auto_time cursor_two = 500; V740 RFID READER ANTENNA NOTE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. REV. 1.1 26 of 27 OPERATION MANUAL © OMRON CORPORATION 2004...
  • Page 27: Declarations

    “limited rights” in paragraph (a) (15) of the clause of DFARS 252.227.7013. Unpublished - rights reserved under the Up-to-date information on RFID Systems can be accessed at OMRON's web site at Copyright Laws of the United States. http://www.omron.com/card/rfid/...

This manual is also suitable for:

V740-ba50c02 usV740-ba50c22 usV740-hs02c

Table of Contents