Omron V530-R150E-2 Operation Manual page 140

SET (Setting) Mode
Note Go to Reference Model , and check that models, including back-
ground, are registered in 3 places.
Background
If a square contains
a space, repeat the
procedure.
Wrong
128
5
Draw a square that fits onto the code without leaving any
gaps.
Specify the top-left and bottom-right corners of the square.
Use the Up/Down/Right/Left Keys to move the cursor to the
required positions and press the ENT Key.
1. Read DM (Pattern)
Model Registration
6
Check the position of the square, and press the ENT or ESC
key to validate the setting and leave this screen.
Reference Model
Code
ESC/ENT: End
Space
183, 223
1. Read DM (Pattern)
Section 6-1