Omron V530-R150E-2 Operation Manual page 67

Trigger Inputs and Output Format
Reading Judgment
Write
Begin write word eg e o d
+0
+1
+2
to
+27
+28
Switch the Scene (20)
Specify the scene number to be switched.
Read
Begin read eg ead
word d
15 to 12
+0 0 0 0 0
+1 – – – –
Either 0 or 1 can be set for "–."
Switch the Scene Number +1 (21)
Increases the scene number by one.
When the current scene number is 9, the scene number will
switch to 0.
Read
Begin read eg ead
d
word
15 to 12
+0 0 0 0 0
15 to 12
Write flag
Reading data 1st byte
Reading data 3rd byte
to
Reading data 53th byte
Reading data 55th byte
Reading data is stored with ASCII codes.
Write flag switches between [0 0 0 0]
data is output. Monitor the flag to see whether reading judg-
ment has been written.
The data capacity (max.) of codes is as follows.
Letters and numbers: 56 letters
The reading data after 56th letter are ignored.
When reading is NG, error codes are output to word +1.
When the byte of reading data is an odd number, a space
(ASCII code 20) is inserted in 0 to 7th byte.
Bit
11 to 8 7 to 4
0 0 0 0 0 0 1 0
– – – – – – – –
Bit
11 to 8 7 to 4
0 0 0 0 0 0 1 0
Bit
11 to 8 7 to 4
0 0 0 0 0 0 0 0
Reading data 2nd byte
Reading data 4th byte
to
Reading data 54th byte
Reading data 56th byte
3 to 0
0 0 0 0
Scene No. Scene number (0 to 9)
3 to 0
0 0 0 1
Section 4-3
3 to 0
0 0 0 0
[1 1 1 1] each time
1:1 Connection
Se Setting g
Command code
1:1 Connection
Se Setting g
Command code
55