Omron V530-R150E-2 Operation Manual page 162

SET (Setting) Mode
Procedure
150
1
Select 2.Image Analysis .
0. Image Adjust
1. Read QR (Normal)
2. Image Analysis
2
Select Measure Length .
Display Pixel Value
Line Bright (X)
Line Bright (Y)
Image Magnifier
Measure Length
3
Move the cross cursor to the beginning point using Up/
Down/Left/Right Keys and press the ENT Key.
Press the SHIFT Key at the same time to move faster.
4
Specify the end point in the same way.
The length of the straight line is measured.
5
Press the ESC Key to leave this screen.
Section 6-1