Omron V530-R150E-2 Operation Manual page 118

SET (Setting) Mode
106
It is possible to view and, if necessary, change the parame-
ter setting in Reading Settings (Manual) .
p.107
ABCDE12345
GrayEdgeVal: 66 (7~126), Rev: OFF
The parameters obtained are displayed. These
parameters are used as settings.
In RUN mode, only the read data (ABCDE12345
in this example) is output to RS-232C.
If reading is not performed correctly, the teaching function
will stay ON. To turn the teaching function OFF, select Read-
ing Settings (Manual) from the screen shown in step 2, and
press the ENT Key. The teaching function will be turned
OFF by entering the Reading Settings (Manual) window.
Section
OK 6487ms
6-1