Omron V530-R150E-2 Operation Manual page 215

Error Codes and Countermeasures
Error Code
E011 Decode error (Format
information error)
E012 Decode error
E013 Decode error
(Cell recognition error)
E020 Decode error
(No definition error)
E030 Pattern search NG
Confirming Pixels Per Cell
When Display Settings/Detail Data is turned ON, the number
of pixels per cell is displayed together with detail information if
reading is OK. When reading is NG, confirm the number of pixels
per cell under 2. Image Analysis/Measure Length .
QR Codes
Description
1
A margin of 4 or more cells around the code is required.
2
Format information of the code. (
four.)
Countermeasures
"Format information" in QR Codes may be
stained or damaged. (Refer to the figure
below.)
"Version information" in QR Codes is not
correct.
Codes were restored to correct errors, but
not decoded correctly.
Data of QR Codes may be stained or
damaged.
The printing is in a special format and not
defined for the V530-R150 (connection
mode, etc.).
Change the printing format.
As a result of the pattern search, 32 or more
proposed finder patterns were found.
Make sure the image is displayed on the
monitor correctly and check the registered
mode.
Section 9-2
There are
203