Omron V530-R150E-2 Operation Manual page 182

System
Loading Data From the Computer (V530-R150
Procedure
6-4-3 Image Storage
Selects whether to store the reading image or not. A maximum of
24 images can be stored.
Note The stored images are cleared when the power is turned OFF.
Back up to a personal computer to keep the image data.
170
1
Follow steps 1 to 3 in the above procedure to connect the
V530-R150 and the computer.
2
Select Transfer/Send File from the Hyper Terminal menu.
Select the file to be loaded.
Set the protocol to Xmodem .
3
Select Send .
The data transfer screen will be displayed.
4
Load data with V530-R150.
Data will be transferred from the computer to the
V530-R150.
The V530-R150 generates a timeout error if no response is
received from the external device within 30 seconds. An er-
ror message will be displayed, and the error terminal will
turn ON.
Image storage
p. 166
Image storage
1
Select the conditions to store reading images.
None
Only NG
(Default setting)
All
Personal Computer)
No images are stored.
Only NG (unreadable) images are
stored.
All images are stored regardless of
readable or unreadable.
Section 6-4