Omron V530-R150E-2 Operation Manual page 113

SET (Setting) Mode
0. Image Adjust (DM)
If this setting is turned ON, the filtering method set will be per-
formed twice. The time required for filtering will increase by
approximately 33 ms, but when reading codes made up of dots,
reading can be performed with greater stability by performing
smoothing twice.
Example: Image obtained when smoothing is performed twice.
Procedure
Filtering Retry
1
Select 0. Image Adjust (DM) .
0. Image Adjust (DM)
1. Read DM (Normal)
2. Image Analysis
2
Select Filtering Retry .
Shutter Speed
Filtering
Filtering Retry
BGS Levels
Section 6-1
101