Omron V530-R150E-2 Operation Manual page 64

Trigger Inputs and Output Format
Send
Receive
Data is output from the V530-R150 without polling commands.
<Header >
Switch the Scene (@MS Unit No. Scene No.) 1:N Connection
Switches the scene number to be displayed.
Send
Receive
Data is output from the V530-R150 without polling commands.
Correctly switched:
<Header >
Incorrectly switched:
<Header >
4-3-2 Communications Mode: Host Link
Command Table
52
<Unit No.>
<Unit No.>
<Unit No.>
<Unit No.>
Command Code
10 One shot reading
11 Start continuous reading
12 Stop continuous reading
20 Switch to a specified scene number
21 Increase the displayed scene number by one
22 Decrease the current scene number by one
23 Read the scene number currently displayed
<Unit No.> <Footer>
<Scene No.> <Footer>
<Scene No.>
OK <Footer>
ER <Footer>
Function
Section 4-3
<Footer>