MON (Monitor) Mode
Reading Judgment
NG will be displayed when reading is
not performed correctly or reading
data is not coincident with registered
data for coincidence judgments 0 to 3.
Displayed Images. Press the SHIFT + Up/Down Keys to switch images.
Types of Displayed Image
Freeze ( )
Through
Memory
Image 0
Image 1
152
Data obtained
A still image immediately after measurement. The memory number
(0 to 23) under which the image is stored is displayed in
reading moving objects, display freeze images.
A live image from the Camera. When reading is performed on
through images, a delay of 33.3 to 66.6 ms max. (depending on
timing of command inputs) will occur before starting to load images.
Measurement
command
Camera
run-cycle
A reading image stored in the past.
The reading images which are coincident with image storage
conditions are stored in memory 0 to 23.
How to set storage conditions of images.
An image after filtering according to the settings in SET/Image
Adjust .
Reading is performed on the image after filtering.
An edge detection image for Data Matrix processing. (For a scene
in which conditions are set for QR Codes, this will be same as the
Image 0.)
ABCDE12345
Image input
(Image transferred
to V530)
33.3 ms
66.6 ms
Section
6-2
Reading Time
205ms
. When
p. 170