Omron V530-R150E-2 Operation Manual page 177

System
Operational Procedures for RS-232C, Normal, Host Link and Terminal
Block
Procedure
used to wait until the data output becomes stable. Set a time
between 1.0 and 1000.0 ms that is longer than the delay
time for the external device.
(The default setting is 1.0 ms.)
5
Set the time during which the GATE signal is ON. Set a value
between 1.0 and 1000.0 ms so that the external device can
read the reading judgment. (The default setting is 5.0 ms.)
1
Select Communications .
System settings
Communications
Backup
Image storage
Startup mode
Multi drop
Error method
Version
2
Select RS-232C , Normal , Host link , or Terminal block .
Section 6-4
165