Table of Contents
Advertisement
B – Options
Contact Teledyne TSS for advice if you wish to upgrade an existing 440 or 350 / 350 Powertrack
System to a Dualtrack.
1. Refer to this Manual and the 350 / 350 Powertrack Manual for instructions to use DeepView for
Windows in its 440 and 350 and 350 Powertrack modes.
2. Use the selection buttons on the DeepView for Windows tool bar to select
either the 440 or the 350 operating mode. These buttons are available for use
only if you select Dualtrack as the SEP type in the System Configuration Wiz-
ard. The buttons are mutually exclusive – you cannot operate the installation
with the 440 System and the 350 System operating simultaneously.
3. DeepView for Windows annotates the internal logging file with the operating mode so that it
can replay the file correctly.
Note that the external logging file changes its format when you switch between the
440 and the 350 mode. Be aware that this might cause problems with the data
logger and its software.
B.1.6.3 Forward Search Window
In addition to the DeepView for Windows information outlined in
manual. The Forward Search Window [Ctrl + F] (or via the View Drop down menu) is available for use
with the 350 and Dualtrack options.
Figure B-5: DeepView for Windows: Forward Search Window
B-10
IMPORTANT
Chapter 6 "Operating software"
© Teledyne TSS
of this
DPN 402196 Issue 4.1
Advertisement
Table of Contents
