Mechanical Drawings; Table 10-2: Mechanical Drawings - Teledyne 440 System Manual

10 – System Drawings

10.2 Mechanical Drawings

Table 10-2: Mechanical drawings

Standard Product
Drawing Number
N/A
400604 – 1
400667 – 1
400667 – 2
401181 – 1
401071 – 1
400654 – 1
490232 – 1
490228 – 1
500045 – 1
B930892 – 1
601004– 1**
B930473 – 1
601824 – 1
601203 - 1
500268 - 1
* Stainless Steel Drawing Numbers included in this table for information only. For details and
specification see the corresponding Standard Product Drawing Numbers.
** The coil cable assembly can be supplied in 3, 4, 6, 8 or 10m lengths. Drawing 601004 identifies the
specific cable assemblies using the part number 601004/x, where 'x' reflects the specific cable length.
For example, 601004/4 identifies the 4m coil cable assembly.
10-16
Description
SDC10 Dimensions
Power Supply Chassis Assembly
Main Chassis Assembly
Main Chassis Assembly
Driver PCB Assembly
Analogue PCB Assembly
PSU Filter Assembly
Processor Pod Assembly
Power Supply Pod Assembly - 110 Volt version
Coil Mounting Frame
Coil Assembly
Coil Cable Assembly
PSU to ROV (PWR/COMMS) Cable – 3.0m
Teledyne TSS Altimeter 250Cable Assembly – 3.0m standard
Benthos Altimeter Cable Assembly – 3.0m standard
440 Pipe and Cable Survey System Complete Assembly
© Teledyne TSS
Stainless Steel
Drawing Number*
N/A
400646 – 1
400668 – 1
400668 – 2
N/A
N/A
400655
490233
490230
N/A
N/A
N/A
N/A
N/A
N/A
500270 - 1
DPN 402196 Issue 4.1