5 – Operating Software
5.3.3.4 Load Factory Defaults
To edit these settings, select Configuration
present a dialog box and acceptance will result in the SEP settings being returned to their factory
defaults. Certain parameters within DeepView will also be returned to their default states (see
6).
Table 5-6: Factory System Defaults
Parameter
Target Scaling
Target Weight Coating
Target Diameter
Weight Coating
Pipe Coefficient
Background compensation interval
Video Overlay Parameters
External Output Comms Parameters
External Output Packet
Altimeter Comms Parameters
Altimeter Type
Altimeter Offset
Seawater Rejection
Target Scaling
Target Weight Coating
5-24
➥
Load Factory Default Settings. Selecting this option will
Default Value
1277uV
1cm
27cm
0cm
1
30 mins
COM5, 9600, 8, n, 2
COM3, 9600, 8, n, 2
Coords + signal, 4/second
COM port not specified, 9600, 8, n, 2
Disabled
0cm
Enabled, 10-25C
1277uV
1cm
© Teledyne TSS
Table 5-
DPN 402196 Issue 4.1