Table of Contents
Advertisement
functions by pressing the appropriate function key from the Run Window. See
Keys" on page 5-28
for a list of all the available function keys that you may use in the 440 mode.
Table 5-7: DeepView Toolbar
Function
Button
and Function key
Terminal Window
System Errors Win-
dow
Run Window
Dualtrack using 440
SEP data
Dualtrack using 350
or 350 Powertrack
SEP data
440 coil drive
Function key [F5]
Background com-
pensation
Video overlay
Function key [F3]
DPN 402196 Issue 4.1
Explanation
This button performs the same function as the View
command described above. The button has a toggle action so that the
window will open and close with alternate presses. The normal condition
is for the Terminal Window to be closed when you start to use DeepView.
See
section 5.3.2.6 "Terminal Window" on page 5-19
description.
This button performs the same function as the View
Window command described above. The button has a toggle action so
that the window will open and close with alternate presses. The normal
condition is for the System Errors Window to be closed when you start to
use DeepView. See
section 5.3.2.5 "System Errors Window" on
for a full description.
page 5-18
This button performs the same function as the View
command described above. The button has a toggle action so that the
window will open and close with alternate presses. The normal condition
is for the Run Window to be closed when you start to use DeepView.
This button is only visible when in Dualtrack mode and the 440 SEP has
been enabled. Pressing the 350 icon enables the 350 or 350 Powertrack
SEP and disables the 400 SEP. Refer to appendix B.1 for a description
of Dualtrack.
This button is only visible when in Dualtrack mode and the 350 or 350
Powertrack SEP has been enabled. Pressing the 440 icon enables the
440 SEP and disables the 350 or 350 Powertrack SEP. Refer to appen-
dix B.1 for a description of Dualtrack.
This button will be available if you are operating the 440 as part of a
Dualtrack installation.
This button will be available if you are operating the 440 as part of a
Dualtrack installation: refer to the 350 Powertrack System Manual for fur-
ther details.
This button has a toggle action that enables and disables the video over-
lay with alternate presses. See
for details of the video overlay option.
Setup" on page 5-25
© Teledyne TSS
5 – Operating Software
section 5.3.5 "Function
➥
Terminal Window
➥
System Errors
➥
Run Window
section 5.3.3.5 "Video Overlay
for a full
5- 27
Advertisement
Table of Contents
