Table of Contents
Advertisement
6 – Operating Procedure
❐
ROV body.
Do not operate manipulators or other movable items near to the coils during survey operations.
If you must use the manipulators during a survey, stow them securely and perform a full back-
ground compensation procedure before you resume the survey.
❐
Conductive material.
Do not place conductive metal fixings, straps or other items near the coils during operation.
Use only the supplied nylon fixings and frame components to secure the coil array to the ROV.
❐
Altimeter.
Do not attach any altimeter to the coil array.
Measure the vertical offset distance between the coils and the transducer face of the altimeter.
Use this distance to configure the 440 SEP.
6-6
© Teledyne TSS
DPN 402196 Issue 4.1
Advertisement
Table of Contents
