Line Tabs - Extron electronics DMP 64 Plus User Manual

Line Tabs

The Line tabs allows user to register and configure the audio and dialling of the lines. There
are three secondary tabs: Registration,
Registration
Figure 61.
To register a SIP account:
1. In the User Name field (see figure 61,
DMP 64 Plus through the call server.
NOTE: "User Name" is referred to as "Line Extension" by some call servers.
2. In the Authentication User Name field (
some cases, this will be the same as the user name entered in step 1.
3. In the Authentication Password field (
password.
NOTE: If a password is not required by the call server, leave this field blank.
4. In the Display Name field (
5. In the Primary Proxy Name/IP field, enter the call server IP address or domain name.
6. In the Primary Proxy Port field (
NOTE: If no port number is specified by the user, 5060 is used by default.
7. Click Apply (
fields). Applying the changes does not initiate line registration with the call server.
8. Click Register (
in the Status field next to the Register button.
NOTES:
•
•
•
VoIP Line Registration Tab
), enter a display name for the line (optional).
4
) to make the changes to the DMP 64 Plus (click Clear to clear all
7
) to initiate registration with the call server. Registration is confirmed
8
To unregister a line from the call server, click Unregister (
To clear data from a field, delete the data from the field and click Apply (
If registration is unsuccessful, refer to the logs page (see
page 87) and contact the VoIP system administrator.
Audio on page 86, and Dialing
), enter the user name currently assigned to the
1
), enter a name for the line (optional). In
2
), enter the call server registration
3
), enter the SIP traffic port number.
6
DMP 64 Plus • Internal Web Pages
on page 86.
).
9
).
7
Logs Tab on
85