Tools - Extron electronics DMP 64 Plus User Manual

Tools

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Presets — Opens a submenu to mark and clear
elements in the main workspace as well as an option
to save marked elements to a preset
Mark All Items — Selects all gain blocks,
•
processor blocks, and mix-points in the main
workspace. Performing this function before saving
a preset ensures every element in the workspace is
saved to the preset.
Save Preset — Saves the marked blocks and mix
•
points of the current configuration as a preset.
NOTE: When Save Preset is clicked, if items
are marked only the elements marked with a
green outline are saved to the preset.
• Clear Marked Items — Unmarks all currently
marked elements.
Configure Groups — Opens the Configure
Groups dialog box to create, edit, and delete Gain,
Mute, and Meter groups.
Configure Digital I/O — Opens the Configure
Digital I/O dialog box to assign actions and modes
to the digital inputs and outputs.
Configure Players — Opens the Configure Players dialog box to upload audio files
and assign them to players. Player control options are also found in the dialog box.
Configure ACP Panels — Opens the Configure ACPs dialog box to configure
Extron Audio Control Panel interfaces.
Configure Macros — Opens the Configure Macros dialog box for creating, editing,
and deleting macro functions.
Configure USB Audio — Opens the Configure USB Control dialog with Windows
communication volume and mute controls and Windows playback volume and mute
controls to affect levels and mute status in the connected Extron USB audio processor.
Configure Internal Triggers — Opens the Internal Trigger Setup dialog with the
configuration, testing, and application of internal triggers.
Connect/Disconnect from Device — In
Connect to Device dialog box. In Live mode, Disconnect from
and opens the
Device is listed and returns the software to Emulate mode.
Device Manager — Opens the
Issue RESET Command — Clears the device of all processors and other configuration
settings. This command does not reset general settings such as IP address.
Firmware Loader — Opens the
www.extron.com
to download the software.
Organize Building Blocks — Opens the
Device Settings — Opens the
address, DHCP status, Dante device, and other settings.
Options dialog box to configure DSP Configurator appearance,
Options — Opens the
default settings, DSP value defaults, and so on.
Network Audio Control — Opens the Dante Controller application by Audinate for routing
audio over a Dante network.
Emulate mode, Connect to Device is listed
Device Manager dialog box .
Firmware Loader application, if it is installed. Go to
Organize Building Blocks dialog box.
Device Settings dialog box to edit date and time, IP
DMP 64 Plus • DSP Configurator Software
Figure 18. Tools Menu
17