Live And Emulate Panel - Extron electronics DMP 64 Plus User Manual

Live and Emulate Panel

The Live and Emulate buttons (see figure 21)
allow users to switch between Live and
Emulate mode and displays transmit (Tx) and
receive (Rx) activity when in Live mode.
Live Mode
Enter Live mode to connect to a DMP 64 Plus and push or pull configurations between the
device and host PC. In Live mode, changes made in DSP Configurator are directly applied
to the device. Additionally, presets and macros can be created and stored on the device.
When entering Live mode, the user is prompted with the Connect to device dialog box.
Connect to a DMP 64 Plus in Live Mode
1. Click the Live button in the menu bar of the DSP Configurator.
Alternatively, select Tools > Connect to Device or press <F6> on the keyboard.
The Connect to device... dialog box opens (see figure 22).
2. Connect to the DMP 64 Plus.
To connect via TCP/IP (
• Click the TCP/IP tab in the dialog box. Enter the IP address of the device in the
Hostname or IP Address field. If necessary, enter the device password in the
Password field.
• Enter the port number in the Port field, if available. When port is not specified, DSP
Configurator will attempt to connect to secure ports first.
To connect via USB (
• Click the USB tab in the dialog box.
Select the device from the USB Devices drop-down list.
•
To connect via RS-232 (
Click the RS-232 tab in the dialog box. Select the Com port the device is
•
connected to on the host PC from the Com Port drop-down list.
Figure 22.
):
A
):
B
):
C
Connect to device...TCP/IP, USB, and RS-232
DMP 64 Plus • DSP Configurator Software
Figure 21. Live and Emulate Buttons
19