Extron electronics DMP 64 Plus User Manual page 31

The Device View dialog populates with the selected DMP 64 Plus information (see
figure 27).
Figure 27. Populated Device View Dialog Box
6. Click the Device Config tab (see figure 28,
Figure 28. Device Config Dialog Box
7. In the Rename Device panel, enter the new name of the device in the text field. No
spaces are allowed in the name. Names should be significant identifiers. For example,
enter DMP64Plus-MainRack (
8. Click Apply ( ). A confirmation prompt opens.
3
9. Click Yes (see figure 29,
Configuration dialog box. The new name is written to the Dante interface of the
DMP 64 Plus. Repeat as necessary for all devices.
NOTE: The device name assigned in Dante Controller only applies to the Dante
interface and does not affect the device name recognized in DSP Configurator.
Figure 29. Rename Device Confirmation Diaglox Box
) to open the Device Config page.
1
).
2
) to confirm the new name, then close the Device
1
DMP 64 Plus • Dante Controller 24