Table of Contents
Advertisement
•
Expansion Bus — Contains a submenu to assign a DMP 64 Plus as a Primary or
Secondary unit.
•
Phone Dialer — Configure and test the DMP 64 Plus VoIP line. DSP Configurator must
be connected Live to a DMP 64 Plus V-model in order for the Phone Dialer dialog to be
opened.
Window
The Window menu offers the standard Windows Window Menu options such as Cascade
and Close All Windows.
Help
The Help menu offers the standard Windows Help Menu options such as Content,
Search, and About.
Run Macros Drop-Down
The Run Macro drop-down list (see figure 19) is available when
connected to the DMP 64 Plus in Live mode to view and run any
macros that have been pushed to the device. The drop-down list
is unavailable in Emulate mode.
The list of macros updates dynamically when a new macro is
created. Macros created in DSP Configurator that have not been
pushed to the device appear in the list with an asterisk to the right
of the macro name. Only macros that have been pushed to the
device can be run from the Run Macro drop-down list.
Presets Drop-Down List
Select the Presets drop-down list (see figure 20) to view and
apply presets saved in the current configuration file or on a device
connected in Live mode. Presets with an asterisk next to them
are on the DMP 64 Plus, but not in the current configuration file.
Run a preset to load it into the configuration file.
Alternatively, perform a backup to run all presets and load them
into the current configuration file (see
After selecting a preset from the list, choose one of the following actions from the
DSP Configurator status panel:
•
Recall — Recalls the selected preset and applies settings to the main workspace.
•
Cancel — Cancels the preset recall and returns to the main workspace with the current
emulation or state intact.
•
Delete — Deletes the selected preset from the configuration.
DSP Configurator Status Panel
This Menu Bar panel displays the current status of DSP Configurator and shows when data
is being pushed to or pulled from the device. When the software is ready to perform actions,
the panel displays Ready.
File
on page 16).
DMP 64 Plus • DSP Configurator Software
Figure 19.
Macros
Figure 20.
Presets
18
Advertisement
Table of Contents
Troubleshooting
