Internal Web Pages; Accessing The Embedded Web Pages - Extron electronics DMP 64 Plus User Manual

Audio products mixers and processors
Hide thumbs Also See for DMP 64 Plus:
Table of Contents

Advertisement

Internal Web Pages

The DMP 64 Plus features an internal web server, displayed as a web page. Two web pages
are available: one for general configuration and one for VoIP configuration (V-models only).
The pages allows you to monitor and adjust certain settings of the DMP 64 Plus via LAN
connection. Use a web browser to view the pages on a PC or control system connected to
the device rear panel LAN port (non-V-models) or LAN/VoIP port (V-models only).
This section gives an overview of the internal web pages, which are always available and
cannnot be erased or overwritten. Topics include:

Accessing the Embedded Web Pages

To access the internal web pages:
1.
2.
3.
4.
5.
6.
Accessing the Embedded Web Pages
DMP 64 Plus Default Web Page
DMP 64 Plus VoIP Web Page
Connect the DMP Plus to a LAN using the rear panel LAN port.
On the connected PC, open a web browser.
Enter the IP address of the DMP Plus in the browser Address field.
For the VoIP web page: Enter the IP address followed by /www/voip.html.
NOTE: If the local system administrators have not changed the IP address, and the
device has not been assigned an IP address via DHCP, the default address (LAN
for non-V-models, LAN 1 for V-models) is 192.168.254.254.
Press the <Enter> key on the keyboard.
Enter user or admin in the Username field and the password (if one exists) in the
Password field when prompted.
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. In the event of the complete system reset, the
password reverts to the default, which is no password.
Click Sign In.
DMP 64 Plus • Internal Web Pages
74

Advertisement

Table of Contents
loading

Table of Contents