Dmp 64 Plus Default Web Page; Communication Settings - Extron electronics DMP 64 Plus User Manual

DMP 64 Plus Default Web Page

The DMP 64 Plus default internal web page provides an overall, read-only view of the device
status, with some editable fields.
Panels are:
1
2
Figure 41.
The internal web page does not automatically update. To see an updated page, click the
Refresh button on the web browser.

Communication Settings

The Communication Settings panel (see figure 42) displays the TCP/IP communication
settings. Click EDIT (
and edit the TCP/IP settings. The following can be edited: DHCP status, IP address, subnet
mask, and default gateway.
NOTE: If the Use DHCP checkbox is checked (enabled), the IP address, subnet mask,
Figure 42.
Communication Settings
RS-232 Settings
DMP 64 Plus Default Web Page
) to open the Communication Settings dialog box (see figure 43)
1
and default gateway cannot be edited.
Comm Settings Panel
Device Info
3
Date/Time Settings
4
Figure 43. Comm Settings
DMP 64 Plus • Internal Web Pages
Passwords
5
75