Disconnecting Inputs From Outputs; Sending Sis Commands To Dante Audio Interface Devices Through The Dmp - Extron electronics DMP 64 Plus User Manual

Creating Subscriptions Between Transmitters and Receivers
1. Ensure the control computer and DMP 64 Plus are connected to the same network.
2. From the start menu select:
All Programs > Audinate > Dante Controller > Dante Controller
The Dante Controller - Network View screen opens (see figure 35).
Dante Controller auto-discovers Dante devices on the network and advertises itself to
allow other Dante-enabled devices to communicate with it. Transmitters connect to
receivers using the subscription matrix.
3. To show the transmitters of a
Dante device, click the + box
next to the desired device in the
Dante Transmitters panel, such
as AXI22D-ConfRm1 (
+ changes to a – sign when the
device expands.
4. To show the receivers of a Dante
device, click the + box next to
the desired device in the Dante
Receivers panel, such as
DMP64Plus-MainRack (
5.
Click the intersection of the desired
subscription between a transmitter
and a receiver (
A check mark at the intersection
indicates the subscription is made.
A check mark also appears next to
the receiver channel.
NOTE: A receiver can connect
to only one transmitter. A
transmitter can connect to
multiple receivers.

Disconnecting Inputs from Outputs

To undo routing, click the junction again to disconnect the receiver from the transmitter.
NOTE: After making changes to Dante network routing such as subscriptions, device
names, or channel labels, wait at least 5 seconds before disconnecting or powering
down the devices. This ensures that the new information is properly saved to those
devices. Device level configuration such as sample rates, latency, and clock settings
are saved instantly.

Sending SIS Commands to Dante Audio Interface Devices through the DMP

The DMP 64 Plus can be set to pass through SIS commands to connected Dante-
controlled Extron devices (see
commands).
). The
1
).
2
).
3
Figure 35.
Dante Control and Configuration
Routing Tab of Network Screen
on page 52 for SIS
DMP 64 Plus • Dante Controller 29