Extron electronics DMP 64 Plus User Manual page 52

Command
IP Setup Commands
Set unit name
Set unit name to factory
default
View unit name
Set date/time
View date/time
View date/time in hex
View GMT offset
Set DHCP on
Set DHCP off
View DHCP mode
NOTE:
The following commands affect the LAN port on a C AT model and the LAN 1 port on the C V AT.
Set IP address
View IP address
View hardware address
(MAC)
Set subnet mask
View subnet mask
Set gateway IP address
View gateway IP address
Set IP
Set IP/subnet
Set IP/subnet/gateway (all)
View IP/subnet/gateway (all)
Set DNS server IP address
View DNS server IP address
KEY: X@
= GMT Offset Value:
X#
= Unit Name:
X$
= Local Date and Time Format:
X%
= IP Address:
X^
= Hardware MAC Address:
X&
= Subnet Mask:
X(
= Date and Time in Hex:
X1(
= Default Name:
X2*
= NIC Number:
X2(
= Prefix (subnet mask bits):
X5%
= DHCP Status:
ASCII command
(host to device)
EX# }
CN
E •
}
CN
E }
CN
EX$ }
CT
E }
CT
E }
*CT
E }
CZ
E }
1DH
E }
0DH
E }
DH
EX% }
CI
E }
CI
E }
CH
Verbose mode 2/3
EX& }
CS
E }
CS
EX% }
CG
E }
CG
E X2* X% }
* CISG
E X2* X% X2( }
* / CISG
E X2* X% X2( X% }
* / * CISG
E X2* }
CISG
EX% }
DI
E }
DI
This represents hours and minutes (hh:mm) offset from Greenwich Mean Time.
Text string up to 63 characters drawn from the alphabet (A-Z), digits (0-9), and minus sign/hyphen (-).
MM/DD/YY-HH:MM:SS
xxx.xxx.xxx.xxx
Leading zeros in each of the 4 fields are optional in setting values and are suppressed in responses.
00-05-A6-xx-xx-xx
xxx.xxx.xxx.xxx
Leading zeros in each of the 4 fields are optional in setting values and are suppressed in responses.
Date and time returned in 7 hex bytes (month, day, year, hour, minutes, seconds, and day of the week with
Sunday = 1).
Combination of unit model name and last 3 pairs of MAC address
Network Interface Card number 1 or 2 (only V-models have 2 NICs)
Subnet 255.255.0.0 is represented as a Prefix value of /16.
0 1
= off (default) = on
Response
(device to host)
• X#]
Ipn
• X1( ]
Ipn
X#]
• X$]
Ipt
X$]
X( ]
X@]
]
Idh1
]
Idh0
X5% ]
• X%]
Ipi
X%]
X^]
X^]
Iph
• X&]
Ips
X&]
• X%]
Ipg
X%]
X2* X% X2( X%]
Cisg• * / *
X2* X% X2( X%]
Cisg• * / *
X2* X% X2( X%]
Cisg• * / *
X% X2( X%]
/ *
X%]
Ipd•
X%]
DMP 64 Plus • SIS Configuration and Control
Additional description
In all CISG commands, the
X%
first represents the IP
X2(
address, represents
the subnet mask, and the
X%
second represents the
gateway IP address.
45