Table of Contents
Advertisement
Call Status — Displays a green "off hook" (active) or a red "on hook" (inactive) icon
•
depending on the call status of that line.
Packets Rx — Displays the total number of packets received on the line for the
•
current call.
•
Packets Dropped — Displays the total number of packets dropped on that line for
the current call.
•
Jitter Rx — Displays the current inbound network jitter value for that line in the
current call (highest network jitter value if multiple appearances of jitter).
Duration — Displays the duration of the current call in hh:mm:ss format.
•
Details
The Details panel (see figure 54,
appearance within the line currently selected in the VoIP Status panel including the current
codec in use, call duration, packets received, packets dropped, and inbound jitter.
Network Tab
The Network tab has five secondary tabs for VoIP network configuration:
•
Interface
NOTE: For more information regarding VoIP network configuration, refer to the
DMP 64 Plus product page at www.extron.com.
Interface
The Interface tab allows user to set the VoIP interface (see figure 55).
Figure 55.
To set the VoIP interface:
1.
From the VoIP Interface drop-down list (
used for VoIP network traffic. Options are LAN 1, LAN 2, and VLAN.
NOTE: Only select VLAN when joining a tagged network port on the switch.
on page 78) displays the details of each
2
•
QoS/LLDP-MED
•
Interface Tab
Transport
•
NAT Traversal
) select the desired LAN/VoIP port to be
1
DMP 64 Plus • Internal Web Pages
•
Advanced
79
Advertisement
Table of Contents
Troubleshooting
