Recommendations; Point Of Reference; Updates - Raven RS1 Calibration And Operation Manual

C 2
HAPTER

RECOMMENDATIONS

Before installing the RS1 system, park the machine where the ground is level, clean, and dry. Bleed pressure from
the hydraulic system and leave the machine turned off for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
Raven Industries recommends the following best practices when installing or operating the RS1 system for the first
time, at the start of the season, or when moving the RS1 system to another machine:
• Verify that the machine hydraulic system is using fresh oil and that the filters have been recently changed
• Ensure there are no issues with the machine hydraulic system (e.g., pump issues, faulty hydraulic motors, fine
metal deposits in the hydraulic hoses, etc.).

POINT OF REFERENCE

The instructions in this manual assume that you are standing behind the machine, looking toward the cab.

UPDATES

Software and manual updates are available on the Raven Applied Technology website.
Sign up for email alerts, and you will be automatically notified when updates for your Raven products are available
on the website!
At Raven Industries, we strive to make your experience with our products as rewarding as
possible. One way to improve this experience is to provide us with feedback on this manual.
Your feedback will help shape the future of our product documentation and the overall service we
provide. We appreciate the opportunity to see ourselves as our customers see us and are eager
to gather ideas on how we have been helping or how we can do better.
To serve you best, please send an email with the following information to
-Raven RS1™ and RS Lite™ Calibration and Operation Manual
-016-4010-001 Rev. J
-Any comments or feedback (include chapter or page numbers if applicable).
-Let us know how long have you been using this or other Raven products.
We will not share your email or any information you provide with anyone else. Your feedback is
valued and extremely important to us.
Thank you for your time.
8
https://portal.ravenprecision.com/
techwriting@ravenind.com
Raven RS1™ and RS Lite™ Calibration and Operation Manual