Recommendations And Best Practices; Point Of Reference; Preparing For Install; Aerials And Signal Interference - Raven RS1 Installation Manual

With direcsteer

Hide thumbs Also See for RS1:

Table of Contents

Recommendations and Best Practices

Instructions provided generally assume you are standing behind the machine facing toward

the cab. More specific orientation may be provided as necessary to complete procedures.

Ensure there are no issues with the machine hydraulic system (e.g., pump issues, faulty

hydraulic motors, fine metal deposits in the hydraulic hoses, etc.).

Verify that the machine hydraulic system is using fresh oil and that the filters have

been recently changed.

Ensure there are no issues with the steering system (e.g., worn bushings, faulty tie rod

ends, improperly adjusted steering components, etc.)

Due to the relatively low broadcast power from satellites, all GNSS receivers and aerials tend

to be susceptible to sources of signal noise and interference as compared to terrestrial

signals (i.e. radio or cellular).

Note:

Poor GNSS signal reception may cause other systems which rely on GNSS solutions

(e.g. auto-steer systems, rate control systems, etc.) to disengage or may cause undesired

operation or results.

The following recommendations are intended to provide an optimal environment for GNSS

systems and provide the best up-time results, even as sources of interference may spike

throughout the day.

Important Safety Information

Table of Contents

Sc1