Introduction; System Specifications; Rs1 Electrical Rating; Installation Best Practices - Raven RS1 Calibration And Operation Manual

Hide thumbs Also See for RS1:

Table of Contents

CHAPTER

Thank you for purchasing the RS1™ system.

The instructions in this manual are designed to assist in the proper calibration and operation of the RS1 system

when used with the Viper 4 or CR7 series field computers.

NOTE:

Installation of the RS1 system must be completed before calibrating the system. Refer to the machine-

specific RS1 Installation Manual for assistance with installation of the RS1 system.

The Raven field computer must be calibrated specifically for the equipment before being used to

operate the RS1 system. Refer to the Operation Manual for the field computer used to operate the

RS1 system.

Installation and Operation Manuals for Raven systems can be downloaded from the Raven website:

The specifications below are specific to the RS1 system:

016-4010-001 Rev. J

I NTRODUCTION

C H A P T E R 2

https://portal.ravenprecision.com/

Current Rating

Voltage Range

6 Amps

8 - 24 Volts

WARNING

Carefully read and follow all safety requirements

and precautions contained in this manual and the

machine-specific Installation Manual. Failure to

follow safety instructions may lead to equipment

damage, personal injury, or death.

Table of Contents

Rs lite