Table of Contents
Advertisement
CHAPTER
2
Introduction
Congratulations on your purchase of the Raven OmniRow system! This system is designed to allow you to
manage variable-rate seeding, automatic on/off planter control, and real-time seed monitoring, eliminating
costly skips, doubles, and over-plants.
This manual applies to various John Deere planters equipped with standard John Deere row units and options.
Recommendations
Raven Industries recommends the following best practices when installing the OmniRow system:
•
Use part numbers to identify the parts.
•
Do not remove the plastic wrap from a part until it is necessary for installation.
•
Do not remove plastic caps from a part until it is necessary for installation.
Tools Needed
The following tools are recommended for installation of the OmniRow system:
•
SAE standard-sized wrenches
•
Cable ties
•
Set of tools
•
Metric wrenches/sockets
•
Allen wrenches
Preparing for Installation
Before installing OmniRow, park the machine on a level, clean, and dry surface. Leave the machine turned off
for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
Manual No. 016-3001-004
I ntroduction
C h a p t e r 2
3
Advertisement
Table of Contents
