Raven RS1 Calibration And Operation Manual page 11

Hide thumbs Also See for RS1:

Table of Contents

IMPORTANT:

Avoid applying direct spray or pressure washing of electrical components and connections. High pressure

streams and sprays can penetrate seals, cause corrosion, or otherwise damage electrical components.

When performing maintenance:

• Inspect electrical components and connectors for corrosion, damaged pins or housings, etc. Repair or replace

components or harnessing as necessary.

• Ensure connectors are kept clean and dry. Apply dielectric grease to the sealing surfaces of all connections

exposed to moisture, dirt, debris, and other contaminates. Repair or replace harnessing as necessary.

• Clean electrical components with pressurized air, aerosol electrical cleaning agent, or low pressure rinse.

• Remove visible surface water from electrical components and connections using pressurized air or an aerosol

cleaning agent. Allow components to dry thoroughly before reconnecting cables.

Important Information: Recommendations and Best Practices

IMPORTANT INFORMATION

Table of Contents

Rs lite