Raven RS1 Calibration And Operation Manual page 19

Hide thumbs Also See for RS1:

Table of Contents

FIGURE 5. Steering Configuration Page

4. Verify that the correct steering controller partner has been identified:

•

OEM TECU (tractor electronic control unit)

•

Sauer Danfoss CL/CLS Valve

•

SmarTrax MD

•

SmarTrax HD Analog

•

SmarTrax HD PWM

5. Select the Next arrow.

FIGURE 6. Antenna Fore/Aft Page

6. Select the value box to enter the Antenna Fore/Aft position.

NOTE:

The Antenna Fore/Aft position is calculated by measuring from the rear axle of the machine to the

middle of the RS1 unit. Enter a negative value if the RS1 unit is located behind the rear axle.

7. Select the Next arrow.

016-4010-001 Rev. J

CALIBRATION - HDU-SPECIFIC, MD, AND STEERING-READY

Table of Contents

Rs lite