Table of Contents
Advertisement
CHAPTER
2
Preparing for Installation
Before installing AutoBoom, park the machine where the ground is level, clean, and dry. Leave the machine
turned off for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
Recommendations
Raven Industries recommends the following best practices when installing the AutoBoom system.
•
Use part numbers to identify the parts.
•
Do not remove the plastic wrap from a part until it is necessary for installation.
•
Do not remove plastic caps from a part until it is necessary for installation.
Tools Needed
The following tools are recommended for installation of the PowerGlide Plus gauge wheel retrofit kit:
•
SAE standard-sized wrenches
•
Set of tools
Point of Reference
The instructions in this manual assume that you are standing behind the machine, looking toward the cab.
Updates
Software and manual updates are available on the Raven Applied Technology website:
Manual No. 016-0230-112 Rev. A
I ntroduction
C h a p t e r 2
http://www.ravenhelp.com
3
- Quick Links:
- Kit Contents
Hide quick links:
Advertisement
Table of Contents
