Raven RS1 Installation Manual

For massey ferguson 8600/8700 and challenger mt6x5c/d/e

Hide thumbs Also See for RS1:

MASSEY FERGUSON 8600/8700 AND

CHALLENGER MT6X5C/D/E STEER READY RAVEN

RS1™ ISO GUIDANCE AND STEERING

INSTALLATION GUIDE

This quick guide provides installation instructions of RS1 on a steer ready Massey Ferguson 8600/8700 tractor. For

calibration and operation information, refer to the Operation Manual (P/N 016-4010-001) included with the kit.

The RS1 is an all-in-one unit that provides GPS, guidance, and optional cellular connectivity.

INSTALLATION DIAGRAM

The image below provides a basic overview of the installation of the RS1. Refer to the next sections for detailed

installation information.

Manual No. 016-5033-152 Rev A1. EC31824 08/18

Table of Contents

Need help?

Do you have a question about the RS1 and is the answer not in the manual?

Page 1 The RS1 is an all-in-one unit that provides GPS, guidance, and optional cellular connectivity. INSTALLATION DIAGRAM The image below provides a basic overview of the installation of the RS1. Refer to the next sections for detailed installation information. Manual No. 016-5033-152 Rev A1. EC31824 08/18...
Page 2 FIGURE 1. Massey Ferguson Series Installation Diagram Massey Ferguson 8600/8700 and Challenger MT6X5C/D/E Steer Ready Raven RS1™ ISO Guidance and...
Page 3 RS1 Mounting Bolts RS1 Mounting Bracket 3. With the front of the RS1 (sloped edge) towards the front of the machine, place the installation tab of the RS1 mounting bracket in the installation tab slot. Manual No. 016-5033-152 Rev A1. EC31824 08/18...
Page 4 The latch may need to be adjusted to provide proper compression. To do this, tighten the nut on the bottom of the latch. 7. If applicable, connect the cellular antenna to the back of the RS1 unit and secure the antenna to the roof bracket using the magnet attached to the antenna.
Page 5 Refer to the RS1 Calibration and Operation Manual (P/N 016-4010-001) for instructions on configuring, calibrating, and operating RS1. Please note the location of the master switch on the machine as it is needed for operation. FIGURE 8. Master Switch and Resume Foot Switch...
Page 6 Massey Ferguson 8600/8700 and Challenger MT6X5C/D/E Steer Ready Raven RS1™ ISO Guidance and...