Raven RS1 Calibration And Operation Manual page 32

Hide thumbs Also See for RS1:

Table of Contents

HAPTER

Response Speed. The Response Speed determines how quickly the machine will steer when prompted. If the

Response Speed is too high, the wheel movement may become jittery. If the Response Speed is too low, the

wheel movement may wander lazily. Values range between 1 - 255.

NOTE:

If steering becomes jittery, lower the Response Speed value in increments of 10. If steering does not

become jittery, the Response Speed value may be increased in increments of 10 until the desired

Response Speed is reached.

Last Pass Sensitivity (Non-Tractor Tunesets). The Last Pass Sensitivity determines how tightly the machine tries

to steer on a curved path. If the setting is too high, the machine will steer to the inside of a curve. If the setting

is too low, the machine will steer to the outside of a curve. The Last Pass Sensitivity value ranges from 1 - 500.

NOTE:

The Last Pass Sensitivity value only adjusts the system performance on Last Pass and A-B Curve lines.

Adjusting the Last Pass Sensitivity value will not affect pivot performance. To adjust pivot

performance, adjust the Response Speed and Sensitivity values.

Raven RS1™ and RS Lite™ Calibration and Operation Manual

Table of Contents

Rs lite